DuraBlue Stern Bearing Adhesive Bonded Sizing Calculator.

DURABLUE POSITION 1: Data for Adhesive Bonded sizing: ALERT: Wall thickness is below the minimum recommendation. Please contact Duramax Marine engineering for support.
DURABLUE POSITION:	--- Aft Stern Tube Forward Stern Tube Port Aft Stern Tube Port Forward Stern Tube Port Intermediate Strut Port Strut Starboard Strut Starboard Aft Stern Tube Starboard Forward Stern Tube Starboard Intermediate Strut --Other--
Housing ID (smallest dimension):		inch     mm
Shaft OD (largest dimension):
Machining Tolerance: (default: 0.004" / 0.1016 mm)
1. RUNNING CLEARANCE
2. MACHINED ID
3. MACHINED OD
4. ½ TOLERANCE BAND (Machining tolerance x 0.500)
5. GROOVE MEASURE Number of Grooves Angle between Grooves (A) Groove Width (W) Groove Depth (D)
High ID dimension (MACHINED ID + ½ tolerance band)
Low ID dimension (MACHINED ID - ½ tolerance band)
High OD dimension (MACHINED OD + ½ tolerance band)
Low OD dimension (MACHINED OD - ½ tolerance band)
FITS STOCK TUBE SIZE:     CODE:     ID:  in mm     OD:in mm     LENGTH:   30.5" (775mm)   20.5" (521mm)
+ ADD ANOTHER DURABLUE POSITION

DURABLUE POSITION 2: Data for Adhesive Bonded sizing: ALERT: Wall thickness is below the minimum recommendation. Please contact Duramax Marine engineering for support.
DURABLUE POSITION:	--- Aft Stern Tube Forward Stern Tube Port Aft Stern Tube Port Forward Stern Tube Port Intermediate Strut Port Strut Starboard Strut Starboard Aft Stern Tube Starboard Forward Stern Tube Starboard Intermediate Strut --Other--
Housing ID (smallest dimension):		inch     mm
Shaft OD (largest dimension):
Machining Tolerance: (default: 0.004)
1. RUNNING CLEARANCE
2. MACHINED ID
3. MACHINED OD
4. ½ TOLERANCE BAND (Machining tolerance x 0.500)
6. GROOVE MEASURE Number of Grooves Angle between Grooves (A) Groove Width (W) Groove Depth (D)
High ID dimension (MACHINED ID + ½ tolerance band)
Low ID dimension (MACHINED ID - ½ tolerance band)
High OD dimension (MACHINED OD + ½ tolerance band)
Low OD dimension (MACHINED OD - ½ tolerance band)
FITS STOCK TUBE SIZE:     CODE:     ID:  in mm     OD:in mm     LENGTH:   30.5" (775mm)   20.5" (521mm)
+ ADD ANOTHER DURABLUE POSITION

DURABLUE POSITION 3: Data for Adhesive Bonded sizing: ALERT: Wall thickness is below the minimum recommendation. Please contact Duramax Marine engineering for support.
DURABLUE POSITION:	--- Aft Stern Tube Forward Stern Tube Port Aft Stern Tube Port Forward Stern Tube Port Intermediate Strut Port Strut Starboard Strut Starboard Aft Stern Tube Starboard Forward Stern Tube Starboard Intermediate Strut --Other--
Housing ID (smallest dimension):		inch     mm
Shaft OD (largest dimension):
Machining Tolerance: (default: 0.004)
1. RUNNING CLEARANCE
2. MACHINED ID
3. MACHINED OD
4. ½ TOLERANCE BAND (Machining tolerance x 0.500)
6. GROOVE MEASURE Number of Grooves Angle between Grooves (A) Groove Width (W) Groove Depth (D)
High ID dimension (MACHINED ID + ½ tolerance band)
Low ID dimension (MACHINED ID - ½ tolerance band)
High OD dimension (MACHINED OD + ½ tolerance band)
Low OD dimension (MACHINED OD - ½ tolerance band)
FITS STOCK TUBE SIZE:     CODE:     ID:  in mm     OD:in mm     LENGTH:   30.5" (775mm)   20.5" (521mm)
+ ADD ANOTHER DURABLUE POSITION

DURABLUE POSITION 4: Data for Adhesive Bonded sizing: ALERT: Wall thickness is below the minimum recommendation. Please contact Duramax Marine engineering for support.
DURABLUE POSITION:	--- Aft Stern Tube Forward Stern Tube Port Aft Stern Tube Port Forward Stern Tube Port Intermediate Strut Port Strut Starboard Strut Starboard Aft Stern Tube Starboard Forward Stern Tube Starboard Intermediate Strut --Other--
Housing ID (smallest dimension):		inch     mm
Shaft OD (largest dimension):
Machining Tolerance: (default: 0.004)
1. RUNNING CLEARANCE
2. MACHINED ID
3. MACHINED OD
4. ½ TOLERANCE BAND (Machining tolerance x 0.500)
6. GROOVE MEASURE Number of Grooves Angle between Grooves (A) Groove Width (W) Groove Depth (D)
High ID dimension (MACHINED ID + ½ tolerance band)
Low ID dimension (MACHINED ID - ½ tolerance band)
High OD dimension (MACHINED OD + ½ tolerance band)
Low OD dimension (MACHINED OD - ½ tolerance band)
FITS STOCK TUBE SIZE:     CODE:     ID:  in mm     OD:in mm     LENGTH:   30.5" (775mm)   20.5" (521mm)

CUSTOMER INFORMATION:

Project / Vessel Name:

Customer Name:

Email:

Date:

*Select a user name/email: password:     Creating PDF. Leave window open. *Creates PDF, and submits form to Duramax Marine